Sapor V2 RDA by Wotofo

The Sapor V2 RDA by Wotofo is the modernization of the widely acclaimed Sapor RDA platform, retaining the beloved top-airflow concept while adding another layer of direct-to-coil air channels, coupled with two-post, dual terminal build deck, and available in two chassis size with 22mm Version or 25mm Version. Building upon versatility and user-friendly functionality, the Sapor V2 RDA comes in a trim 22mm diameter for a compact structure or a rangy 25mm for an increased build area to accommodate high powered coil systems. The Sapor V2 RDA improves upon the top airflow concept, with air entering the top system through two 10mm by 2mm airslots and then redirected down into eight airholes directly into the chamber. New to the Sapor RDA V2 are dual adjustable side airslots, each with five airholes, that feeds air channels directly into the coils area, providing another ample layer of airflow. The side airflow system can be used in conjunction or independently from the top airflow, as it can be throttled up for maximal vapor capability or closed separately. Due to the lack of bottom airflow or base exposure, the structural design dramatically reduces issues with leaking and flooding, coupled with deep juice well area to make a great travel rebuildable platform. The build deck features two-post, dual 2mm diameter terminals, side-tension applied design that can easily accommodate a plethora of build configurations and coil structures. With the addition of German-made PEEK Insulator, rhodium-plated copper contact, and Delrin widebore tip, the Sapor V2 is equipped with superior conductivity and effective handle high-performance set-ups. Taking one of the most classic platform to a completely modern apparatus, the Wotofo Sapor V2 RDA firmly asserts itself as a worthy addition to any building enthusiasts.

Sapor V2 RDA 22mm by Wotofo Features:

• 22mm Diameter
• 9mm Deep Juice Well
• Superior 304 Stainless Steel Construction
• Two-Post, Dual Terminal Design
• 2mm Terminal Post
• Deckmilled Negative
• PEEK Insulated Positive Post
• Single or Dual Configurations
• Dual Airflow System
• Top Airflow – Dual 10mm by 2mm Airslots
• Side Airflow – Adjustable Five 1.5mm Diameter Airholes Per Side
• 15mm Wide Delrin Widebore Competition Cap
• Rhodium-Plated Copper 510 Connection

Sapor V2 RDA 25mm by Wotofo Features:

• 25mm Diameter
• 6mm Deep Juice Well
• Superior 304 Stainless Steel Construction
• Two-Post, Dual Terminal Design
• 2mm Terminal Post
• Deckmilled Negative
• PEEK Insulated Positive Post
• Single or Dual Configurations
• Dual Airflow System
• Top Airflow – Dual 10mm by 2mm Airslots
• Side Airflow – Adjustable Five 1.5mm Diameter Airholes Per Side
• 15mm Wide Delrin Widebore Competition Cap
• Rhodium-Plated Copper 510 Connection

Includes:

• 1 Sapor V2 22mm RDA or Sapor V2 25mm RDA
• 1 Comp Wire Pack
• Spare Parts and O-Rings

This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.

Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com??s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com??s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.