Kanger DRIP-EZ 80W Pump Squonker Kit

The Kanger DRIPEZ 80W Starter Kit presents a unique design in vaping platforms, integrating an industrialized pump system that offer an unprecedented dripping experience alongside powerful chipset with firmware upgrades. Designed from ground up with an emphasis on creating the most ergonomic dripping experiences to date, the DRIPEZ features a compartment that houses 15mL or 16mL e-juice bottle with the convenient pump-system directly above the chassis. The innovative “squonk-ready” configuration feeds liquid directly into the tank through the clear tubes, enabled with a simple user-applied pressure pump. This function allows users to effectively feed liquid into the deck when needed, with a massive reservoir for all-day usability. The DRIPEZ RBA comes with an innovative screwless, two-post design with clamp mechanism that allows easy-to-use build configurations, furthering the efficient building experience. The DRIPEZ Mod integrates Kanger’s new chipset with customization and firmware upgrade capability, featuring maximum output of 100W (with firmware upgrade) and full temperature suite with onboard support for Ni200 Nickel, Titanium, and Stainless Steel heating elements. It is powered by a single high-amp battery (sold separately) loaded from a locking battery door located on the side of the device, opposite of the oversized firing mechanism. With one of the most innovative yet easy to use designs to date, the Kanger DRIPEZ 80W TC Starter Kit is an innovative output technology with unprecedented form factor.

Kanger DRIP EZ 80W TC Starter Kit Features:

• Houses 15mL or 16mL E-Juice Bottle
• Single High-Amp 18650 Battery – Not Included
• Maximum Wattage Output: 80W (100W with Upgrade)
• Minimum Atomizer Resistance: 0.1ohm
• Temperature Control Range: 200-600F
• All-In-One Design – Rebuildable Squonker-Style Pump Platform
• Unique Juice Pump System – User-Applied Pressure
• Direct-to-Tank Juice Design
• Versatile Temperature Control Module
• DRIPEZ RBA
• Two-Post Screwless, Threaded Design – Clamp-Style
• Single Build Configuration
• 510 Connection

In order to use temperature control feature, it requires use of nickel coils or titanium coils and must be built with non-resistant wire.

Do not use Ni200, Titanium, and Stainless Steel with non-temperature control devices/mods. This is a risk of battery explosion! Please make sure that the devices/mods that you are using is capable of controlling coil temperature.

Warning: This tank is a Sub-Ohm resistance atomizer and only work on mechanical mod or devices that can handle Sub-Ohm resistance of 0.5ohm or lower. Please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.

Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com??s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com??s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.