Discover the FreeMaX MAXUS 200W Starter Kit, featuring the FM CHIP-MAXUS 1.0 Chipset, single or dual battery, and comes with the Maxus Pro Sub-Ohm Tank. Constructed from durable zinc-alloy, the chassis of the MAXUS 200W Starter Kit is decorated in visually striking resin panels. Outfitted with the FM Chip-Maxus 1.0 Chipset, the MAXUS Kit can deliver an instantaneous firing speed of 15ms. Operating off a single OR dual battery, the FreeMaX Maxus will have a wattage output range of 5-80W or 5-200W, respectively. In addition, the batteries can be installed in any direction thanks to the SmartLoad Technology, making this a great starter kit for beginners. Paired with the FreeMaX Maxus Pro Sub-Ohm Tank , the MAXUS delivers delicious vapor with the new 904L Mesh Coils that heat eJuice rapidly and evenly thanks to the mesh coil heating element. With the ability to access more advanced firing modes, the MAXUS Starter Kit pairs neatly with nickel, titanium, and stainless steel wires for advanced firing modes for seasoned vapers.
FreeMaX MAXUS 200W Starter Kit Features:
FM CHIP-MAXUS 1.0 Chipset
Dimensions – 150mm by 52.5mm by 29mm
Single or Dual High Amp 18650 Battery – Not Included
SmartLoad Technology – No Polarity, Load At Will
Wattage Output Range – Single Battery: 5-80W
Wattage Output Range – Dual Battery: 5-200W
Output Voltage Range: 0.7-8.4V
Resistance Range: 0.1-3.0ohm
Temperature Range: 100-315??C / 200-600??F
15ms Firing Speed
Titanium, Nickel, Stainless Steel Wire Compatibility
Zinc-Alloy Chassis Construction
Single Firing Button
OLED Display Screen
Magnetic Battery Door
Two Adjustment Button
Low Resistance Range
10s Timeout Protection
Open Circuit Protection
Low Voltage Protection
Automatic Coil Test
Same/New Coil Selection
Type-C USB Port
Threaded 510 Connection
Available in Blue Yellow,
FreeMaX Maxus PRO Sub-Ohm Tank Features:
5mL Bubble Glass Capacity
Pyrex Glass Reinforcement
Superior 304 Stainless Steel Tank Construction
Sliding Top Fill System – Single Fill Port
FreeMaX Maxus Pro Coil Series
0.15ohm 904L M1 Mesh Coils – rated for 40-70W
0.2ohm 904L M2 Mesh Coils – rated for 60-90W
FM CoilTech 4.0
Tea Fiber Cotton Wicking Material
Threaded Coil Installation
Dual Slotted Bottom Airflow Control Ring
810 Widebore Drip Tip
Threaded 510 Connection
Please have a great understanding and technical knowledge on how to use this product in order to properly use it.
We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times.
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.
Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com??s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com??s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.