FreeMaX MAXUS 100W Starter Kit

Try out the FreeMaX MAXUS 100W Starter Kit, featuring a FM-Chip Maxus 1.0 chipset, paired with the Maxluke Tank, and can utilize FreeMaX Mesh Coil Options. Featuring SmartLoad Battery Technology, the MAXUS Starter Kit can achieve a 100W ceiling when used with a single 18650, 20700, or 21700 battery, loaded in any position. Equipped with an ultra fast firing speed thanks to the FM Chip-Maxus 1.0, theh MAXUS 100W Kit can deliver vapor at a moment’s notice and has intelligent coil recognition. Paired with the Maxluke Sub-Ohm Tank, the FreeMaX MAXUS 100W can use coils from the mesh coil series to output high grade vapor without sacrificing quality or volume.

FreeMaX MAXUS 100W Starter Kit Features:
FreeMaX FM Chip-MAXUS 1.0 Chipset
Dimensions – 90.2mm by 37.5mm by 28mm
Single High-Amp 20700 / 21700 Battery – Not Included
SmartLoad Technology – Load At Will
Wattage Output Range: 5-100W
Voltage Output Range: 0.7-7.5V
Resistance Range: 0.1-3.0ohm
Temperature Range: 100-315??C / 200-600??F
Nickel, Titanium, and Stainless Steel Wire Compatibility
Power Mode
VPC Mode
Bypass Mode
TC Mode
TCR Mode
Zinc-Alloy Chassis Construction
Intuitive Firing Button
OLED Display Screen
Magnetic Battery Door
Two Adjustment Buttons
Low Resistance Range
10s Timeout Protection
Open Circuit Protection
High-Temp Protection
Low Voltage Protection
Short-Circuit Protection
Automatic Coil Test
Same/New Coil Selection
Type-C USB Port
Threaded 510 Connection
Available in

FreeMaX Maxluke Tank Sub-Ohm Tank Features:
27.5mm Diameter
5mL Bubble Glass Capacity
Pyrex Glass Reinforcement
Sliding Top Fill System – Single Fill Port
FreeMaX Maxluke Coil Series
FM CoilTech 4.0
0.15ohm 904L X1 Mesh Coil – rated for 40-80W
0.2ohm 904L X2 Mesh Coil – rated for 40-80W
Tea Fiber Cotton Wicking Material
Threaded Coil Installation
Dual Slotted Bottom Airflow Control Ring
810 Widebore Drip Tip
510 Threaded Connection
Available in

Includes:
1 MAXUS 100W Mod
1 Maxluke Tank
1 0.15ohm 904L M1 Mesh Coil
1 0.2ohm 904L M2 Mesh Coil
1 5mL Replacement Glass
1 Extra O-Ring
1 Type-C USB Cable
1 Warning Card
1 Warranty Card
1 User Manual

Please have a great understanding and technical knowledge on how to use this product in order to properly use it.

We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times.

In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.

Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com??s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com??s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.