Kanger iBar Pod System

Check out the Kanger iBar Pod System, featuring two voltage based outputs, 1.2ohm integrated coil, and can hold up to 2mL of eJuice in the pod capacity. Constructed from lightweight aluminium-alloy, the chassis of the iBar is relatively impact resistant, housing a 800mAh battery within. Outfitted with a dual voltage output, users can choose between direct voltage or constant voltage output to suit their preferences. In addition, the 2mL pod implements an integrated 1.2ohm coil within, granting the ability to create delicious clouds of vapor. Equipped with a vibrational notification, the iBar Pod System will provide haptic feedback if you draw 15 times within 15 minutes to prevent excessive consumption.

Kanger iBar Pod System Features:
Dimensions – 107mm by 17.5mm by 17.5mm
Integrated 800mAh Battery
Dual Voltage Based Output System
Constant Voltage Output: 3.0V
Direct Voltage Output
Aluminium-Alloy Chassis Construction
Intuitive Firing Button
LED Battery Life Indicator Light
Power Mode Indicator Light – Constant Voltage / Direct Voltage Output
2mL iBar Refillable Pod
Side Fill System – Silicone Stoppered
Integrated 1.2ohm KA Coil – Organic Cotton Wicking System
Magnetic Pod Connection
Vibration Notification
Overcharging Protection
Short Circuit Protection
Low Voltage Protection
Overuse Protection
MicroUSB Port
Available in Gray, Peacock Green, Wine Red, Violet

Includes:
1 Kanger iBar Battery
1 iBar Pod
1 USB Charging Cable
1 User Manual

Make sure to properly prime each coils and pods before use.

Warning: If the coils has a sub-ohm resistance, please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com??s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com??s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.