Geek Vape AEGIS SOLO 100W & TENGU RDA Kit

The Geek Vape AEGIS SOLO 100W & TENGU RDA Kit is a continuation of the legendary AEGIS series, integrating the single 18650 battery platform with 100W maximum output to pair with the user-friendly TENGU 24mm BF RDA.The Geek Vape AEGIS SOLO 100W & TENGU RDA Starter Kit maintains a desirable visual design, now available in a single 18650 battery platform (sold separately), for a slimmer feel while retaining the shockproof and water-resistant elements. The internal AS-100 Chipset within the AEGIS SOLO 100W Mod allows for rapid and responsive firing speed, output range of 5W to 100W, and resistances as low as 0.05ohms. With a complete temperature control suite, the AS-100 chipset unlocks the modes available to dial in the perfect vape.

Paired with the Geek Vape TENGU RDA, the atomizer features a widebore dripping channel and squonkable BF connection pin, user friendly build deck, and a multi-hole side airflow control.Developed from superior stainless steel, the TENGU RDA measures in at 24mm and possesses a spacious build deck with a single elongated post in the middle bisecting the build deck. Designed for a dual coil configuration, a set of four terminals top secured via flathead screws are used to affix coil leads, tightening to fasten them in place to maintain a reliable connection. In the middle of the long post is a juice drip redirect, allowing for juice dripped through the widebore drip tip to be split between both sets of coil configurations. Along the sides of the top cap are a set of honeycomb airflows, inletting the desired amount of controlled airflow thanks to the concealed airflow restrictor that is part of the airflow system. Airflow rushes in through the sides and is inlet to the side of the coil configuration. At the base of the Tengu RDA is a gold-plated pin that can be swapped out for a gold-plated bottom-fed 510 squonking pin.

Geek Vape AEGIS SOLO 100W Box Mod Features:

• AS-100 Chipset
• Dimensions – 86.4mm by 41.2mm by 31.5mm
• Single High-Amp 18650 Battery – Not Included
• Wattage Output Range: 5-100W
• Resistance Range: 0.05-3.0ohm
• Temperature Range: 100??-315??C / 200??-600??F
• Power Mode
• VPC Mode
• TC Mode
• TCR Mode
• Bypass Mode
• Zinc-Aluminium Alloy Chassis Construction
• 10s Cut-Off Protection
• Short-Circuit Protection
• Over-Charging & Discharging Protection
• Over-Heat Protection
• Over-Current Protection
• Anti-Dry Protection
• 510 Connection
• MicroUSB Port
• Available in Black, Gunmetal, Red, Orange, Blue, Green

Geek Vape TENGU 24mm RDA Features:

• 24mm Diameter
• Deep Juice Wells
• Superior Stainless Steel Construction
• Expansive Build Deck – Singular Elongated Post
• 4 Terminals – Top Secured via Flathead Screws
• Juice Redirection Feature for Dripping Enthusiast
• PEEK Insulator
• Single or Dual Coil Configuration
• Concealed Adjustable Honeycomb Style Airflow
• Side to Coil Airflow
• 810 Widebore PMMA Drip Tip
• 810 Widebore Delrin Drip Tip
• Squonkable BF 510 Pin
• Gold-Plated 510 Connection Pin
• Available in Black, Golden, Blue, Stainless Steel, Rainbow, and Gunmetal

Includes:

• 1 Aegis Solo Mod
• 1 Tengu RDA
• 1 Battery Door Tool
• 1 USB Cable
• 1 810 Drip Tip
• 1 510 Drip Tip Adaptor
• 1 GV Triangular Tool
• 1 Hex Wrench
• 1 Gold-Plated BF Positive Pin
• 1 User Manual
• 1 Promotion Card & Warranty Card
• 1 Spare Parts Pack

Please have a great understanding and technical knowledge on how to use this product in order to properly use it.

We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times.

In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.

Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com??s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com??s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.